ProWarm Backer-Pro Tile Backer Boards - 30mm Thickness

ProWarm Backer-Pro insulation boards are made from high quality extruded polystyrene panels, covered with a fibreglass mesh on both sides.

For use with ProWarm underfloor heating mats and loose cables. Not for use with underwood heating systems. They act as first class heat insulation for under floor heating systems. These tile backer boards can also be used as a superior waterproof surface for use under floor or wall tiles.

Key Features:

• 30mm thickness
• Each board is 1200mm x 600mm - and covers 0.72m²
• Waterproof - ideal for wet rooms
• Dimensionally stable
• Light and easy to carry
• Excellent sound insulation - impact sound is hugely reduced
• Cuts with a knife - no need for a jigsaw
• Accepts even the heaviest of wall tiles, providing the correct installation method is followed
• Superb heat insulation with a thermal conductivity value of 0.027 W/mK, making them ideal for use as a thermal barrier with under floor heating

Please note: the colour of the boards may vary, depending on the batch.

Installation

These Prowarm insulation boards should be installed on top of an existing concrete or timber sub-floor, and beneath the underfloor heating mats. The benefits are greatly reduced heat up times and running costs.

When installing onto a concrete sub-floor, the Prowarm flexible tile adhesive is recommended. When installing onto a wooden sub-floor, the tile adhesive is recommended as well as screws and washers.

Click here for full installation instruction manual (PDF) for Prowarm insulation boards!

Specification

Materials	Extruded Polystyrene Sheet - Polymer Modified Coating
Sheet Dimensions	1200mm x 600mm
Thermal Conductivity	0.027 W/mK
Capillarity	Nil
Compression Strength	30 t/m2
Water Absorption	<0.1 vol%
Tensile Strength	350 KPa
Fire Protection Class	Bs 3837:B1 DIN

FREE UK NEXT WORK DAY DELIVERY ON ALL ORDERS OVER £100 (EX VAT)!

Further info:
Prowarm insulation boards installation guide (PDF)

Condition: New
Brand: Prowarm
Manufacturer's Part Number: 30MMTILEBACKER
Availability: InStock
Price Inc VAT: GBP 14.63
UK Shipping Category: Next Work Day Courier Delivery - £8.34 (£6.95 +VAT) - UK Mainland
Weight (largest size, packaged): 2.5kg

"No hassle" 30 day returns policy - providing the item has not been used.

Sizing Information - ProWarm Electric Underfloor Heating & Insulation Boards

What Size Heating Mat Do I Need?

Step 1. Measure Your Room

When planning on installing your underfloor
heating system, you should first measure
the Total Floor Space of the room.

Step 2. Find Out Your Free Floor Space

You should then work out the area of Free Floor Space in m2 by accounting for any permanent fixtures or fittings in the room (e.g. bath, toilet).

Remove 10% from this figure and use this to place your order. You should cover 80- 95% of the free floor space available. Anything less than this will lead to patches of cold spots.

e.g. Conservatory measurement
Total Floor Space = 12m2
Free Floor Space = 10m2 -10%= 9m2

How Many Insulation Boards Do I Need?

Each ProWarm insulation board is 1200 x 600mm and covers a total area of 0.72m2.
For a free floor space of 9m2, you would need 13 ProWarm insulation boards.

Size Of Electric Mat	Boards Required
1m2	2
2m2	3
3m2	5
4m2	6
5m2	7
6m2	9
7m2	10
8m2	12
9m2	13
10m2	14
11m2	16
12m2	17
13m2	19
14m2	20
15m2	21
16m2	23
17m2	24
18m2	25
19m2	27
20m2	28
21m2	30
22m2	31
23m2	32
24m2	34
25m2	35
26m2	37
27m2	38
28m2	39
29m2	41
30m2	42

Buy Brand Tools